Transaction in progress
If you agree and wish to proceed, please click "CONFIRM" transaction in your wallet, otherwise click "REJECT". Please be patient. It can take several minutes. Don't close or reload this window.
Use Trust Wallet or any other compatible one to connect using Wallet Connect
If you agree and wish to proceed, please click "CONFIRM" transaction in your wallet, otherwise click "REJECT".
Please be patient. It can take several minutes. Don't close or reload this window.
Wallet
Transfer an amount of tokens from your account to another
Expend tokens previously approved from an account
Authorize an account to withdraw your tokens up to a specified amount
Exclude this account from the benefits of reflection
Include this account back to the benefits of reflection
Page Total supply - LBK
// SPDX-License-Identifier: MIT
/**
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMWWWWWWWWWWWWWWWMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMWWNXXKKKKKKKXXXXKKKKKKXXNWWMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMWNXKKKKXXNWWWWMMWWWWMWWWWNXXXKKKXNWMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMWNXKKKXNWMMMMMMMMMNOdxKWMMMMMMMMWNXKKKXNWMMMMMMMMMMMMMM
MMMMMMMMMMMMMWXKKKNWMMMMMMMMMMMMNx:;;l0WMMMMMMMMMMMWNK0KXWMMMMMMMMMMMM
MMMMMMMMMMMWXKKXWMMMMMMMMMMMMMMXd:;;;;cOWMMMMMMMMMMMMMWXKKXWMMMMMMMMMM
MMMMMMMMMWNKKXWMMMMMMMMMMMMMMWKo;;col:;:kNMMMMMMMMMMMMMMWX0KNWMMMMMMMM
MMMMMMMMWX0XWMMMMMMMMMMMMMMMWOl;;oKWXkc;:dXMMMMMMMMMMMMMMMWX0XWMMMMMMM
MMMMMMMNKKNWMMMMMMMMMMMMMMMNkc;:dXMMMWOc;;oKWMMMMMMMMMMMMMMWNKKNMMMMMM
MMMMMMNKKNMMMMMMMMMMMMMMMMNx:;:xNMMMMMW0l;;l0WMMMMMMMWMMMMMMMNKKNMMMMM
MMMMMNKKNMMMMMMMMMMMMMMMMXd:;ckNMMMMMMMMKo:;cOWMMMMXkxkXWMMMMMNKKNMMMM
MMMMWK0NMMMMMMMMMMMMMMMWKo;;l0WMMMMMMMMMMXx:;:xNMMW0lccxXMMMMMMN0KWMMM
MMMMX0XWMMMMMMWWMMMMMMWOl;;oKWMMMMMMMMMMMMNkc;:dXMMNklcoKMMMMMMMX0XMMM
MMMWKKNMMWK0OkkkkkkKWNkc;:dXMMMMMMMMMMMMMMMWOl;;oKWMXdcxNMMMMMMMNKKWMM
MMMN0XWMMWNXX0OdlccdKOc;:xNMMMWXKKXNWNNNNWWMW0o;;l0WNkdKWMMMMMMMWX0NMM
MMMX0XMMMMMMMMMN0dlcdOxoONMMMMW0xdddddodxk0KNWXd:;l0Kx0WMMMMMMMMMX0XMM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:;cOWMWKo:;c0WMMMMMMMMMMMMMMWX0KNMMMMMMM
MMMMMMMMMWXKKNWMMMMMMMMMMMMMMXd:;cx0kl;;l0WMMMMMMMMMMMMMWNKKXWMMMMMMMM
MMMMMMMMMMMWX0KNWMMMMMMMMMMMMMNkc;;::;:oKWMMMMMMMMMMMMWNK0XWMMMMMMMMMM
MMMMMMMMMMMMMNXKKXNWMMMMMMMMMMMWOc;;;:dXMMMMMMMMMMMWNXKKXWMMMMMMMMMMMM
MMMMMMMMMMMMMMMWNKKKXNWMMMMMMMMMW0l:ckNMMMMMMMMMWNXKKKNWMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMWNXKKKXXNWWWMMMMX0KWMMMWWWNXXKKKXNWMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMWWNXXKKKKKXXXXXXXXXXKKKKXXNWWMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMWWNNNNNNNNNNNNWWWMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
---------------------- [ WPSmartContracts.com ] ----------------------
[ Blockchain Made Easy ]
|
| ERC-20 Standard Token
|
|----------------------------
|
| Flavors
|
| > Pistachio 3.0: ERC-20 Standard Token
|
*/
pragma solidity ^0.8.2;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
contract ERC20Pistachio is ERC20 {
uint8 private immutable _decimals;
constructor(address owner_, string memory name_, string memory symbol_, uint8 decimals_, uint256 supply_) ERC20(name_, symbol_) {
require(decimals_ <= 18, "ERC20Pistachio: decimals has to be lower or equal than 18");
_decimals = decimals_;
_mint(owner_, supply_);
}
/**
* @dev Returns the the token's decimal places.
*/
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
[
{
"inputs": [
{
"internalType": "address",
"name": "owner_",
"type": "address"
},
{
"internalType": "string",
"name": "name_",
"type": "string"
},
{
"internalType": "string",
"name": "symbol_",
"type": "string"
},
{
"internalType": "uint8",
"name": "decimals_",
"type": "uint8"
},
{
"internalType": "uint256",
"name": "supply_",
"type": "uint256"
}
],
"stateMutability": "nonpayable",
"type": "constructor"
},
{
"anonymous": false,
"inputs": [
{
"indexed": true,
"internalType": "address",
"name": "owner",
"type": "address"
},
{
"indexed": true,
"internalType": "address",
"name": "spender",
"type": "address"
},
{
"indexed": false,
"internalType": "uint256",
"name": "value",
"type": "uint256"
}
],
"name": "Approval",
"type": "event"
},
{
"anonymous": false,
"inputs": [
{
"indexed": true,
"internalType": "address",
"name": "from",
"type": "address"
},
{
"indexed": true,
"internalType": "address",
"name": "to",
"type": "address"
},
{
"indexed": false,
"internalType": "uint256",
"name": "value",
"type": "uint256"
}
],
"name": "Transfer",
"type": "event"
},
{
"inputs": [
{
"internalType": "address",
"name": "owner",
"type": "address"
},
{
"internalType": "address",
"name": "spender",
"type": "address"
}
],
"name": "allowance",
"outputs": [
{
"internalType": "uint256",
"name": "",
"type": "uint256"
}
],
"stateMutability": "view",
"type": "function"
},
{
"inputs": [
{
"internalType": "address",
"name": "spender",
"type": "address"
},
{
"internalType": "uint256",
"name": "amount",
"type": "uint256"
}
],
"name": "approve",
"outputs": [
{
"internalType": "bool",
"name": "",
"type": "bool"
}
],
"stateMutability": "nonpayable",
"type": "function"
},
{
"inputs": [
{
"internalType": "address",
"name": "account",
"type": "address"
}
],
"name": "balanceOf",
"outputs": [
{
"internalType": "uint256",
"name": "",
"type": "uint256"
}
],
"stateMutability": "view",
"type": "function"
},
{
"inputs": [],
"name": "decimals",
"outputs": [
{
"internalType": "uint8",
"name": "",
"type": "uint8"
}
],
"stateMutability": "view",
"type": "function"
},
{
"inputs": [
{
"internalType": "address",
"name": "spender",
"type": "address"
},
{
"internalType": "uint256",
"name": "subtractedValue",
"type": "uint256"
}
],
"name": "decreaseAllowance",
"outputs": [
{
"internalType": "bool",
"name": "",
"type": "bool"
}
],
"stateMutability": "nonpayable",
"type": "function"
},
{
"inputs": [
{
"internalType": "address",
"name": "spender",
"type": "address"
},
{
"internalType": "uint256",
"name": "addedValue",
"type": "uint256"
}
],
"name": "increaseAllowance",
"outputs": [
{
"internalType": "bool",
"name": "",
"type": "bool"
}
],
"stateMutability": "nonpayable",
"type": "function"
},
{
"inputs": [],
"name": "name",
"outputs": [
{
"internalType": "string",
"name": "",
"type": "string"
}
],
"stateMutability": "view",
"type": "function"
},
{
"inputs": [],
"name": "symbol",
"outputs": [
{
"internalType": "string",
"name": "",
"type": "string"
}
],
"stateMutability": "view",
"type": "function"
},
{
"inputs": [],
"name": "totalSupply",
"outputs": [
{
"internalType": "uint256",
"name": "",
"type": "uint256"
}
],
"stateMutability": "view",
"type": "function"
},
{
"inputs": [
{
"internalType": "address",
"name": "recipient",
"type": "address"
},
{
"internalType": "uint256",
"name": "amount",
"type": "uint256"
}
],
"name": "transfer",
"outputs": [
{
"internalType": "bool",
"name": "",
"type": "bool"
}
],
"stateMutability": "nonpayable",
"type": "function"
},
{
"inputs": [
{
"internalType": "address",
"name": "sender",
"type": "address"
},
{
"internalType": "address",
"name": "recipient",
"type": "address"
},
{
"internalType": "uint256",
"name": "amount",
"type": "uint256"
}
],
"name": "transferFrom",
"outputs": [
{
"internalType": "bool",
"name": "",
"type": "bool"
}
],
"stateMutability": "nonpayable",
"type": "function"
}
]